Bitumen sprayer / bitumen Pressure Distributor
 
Model AE 4000 AE 6000 AE 8000 AE 10000 AE 12000
Capacity 4 Tons 6 Tons 8 Tons 10 Tons 12 Tons
Bitumen Pressure Distributor is essential machinery for road building. Bitumen Sprayer allows uniform spraying of bitumen. These sprayers are available in capacities of 4 T, 6 T, 8 T, 10 T and 12 Tons. These tar sprayers are with designed to perform in rough conditions and are tried and tested in Indian conditions. ATLAS bitumen distributors allow uniform hot bitumen distribution. ATLAS Bitumen Sprayers are designed with precision. The quality we give is unparallel. All the parts used are highly durable and suited for tough Indian conditions. Operating and maintenance is easy and does not require skilled labour. All the safety points are very well considered while making this sprayer. However tough and accurate your spraying job may be, this sprayer will surely deliver.
Bitumen Sprayers, Tar Sprayer, Bitumen Pressure Distributor, Bitumen sprayer for sale, asphalt sprayer, Road Construction Equipment, Bitumen Manufacturer Gujarat India
TANK
Tank supplied with the bitumen sprayer is fabricated by a 5 mm MS sheet and is coated by 50 mm glasswool. This is done to prevent heat loss. The outer covering is galvanized. Galvanized tank is better as is preferred as it has long life due to its anti-corrosion properties.
Bitumen storage tank heating is by a first stage heating pipeline of diameter 10 inches and second stage pipeline of diameter 8 inches.

A manhole to fill the tank or for maintenance of 450 mm diameter is provided. A manual as well as an electronic temperature guage is provided with the bitumen pressure distributor for temperature display upto 300 Degrees celcius. Electronic temperature guage is fitted at the drivers cabin. For the ease of access to the top, a ladder and a platform is provided. A cock is given to drain out full bitumen from the tank when required.
BURNER
Diesel compatible burner for adequate heating of viscose binder with oil is provided. The fuel consumption of the burner is 7-8 liters/ hrs.
Hand torch type burner is for manually cleaning the pipelines in extreme cold conditions. This burner will be useful to facilitate quick start up of the sprayer in extreme cold conditions. A 100 liters fuel storage tank for burner and 50 liters fuel storage tank for engine is provided.
ENGINE
Single stage twin cylinder air cooled diesel engine of 25HP at 2000 RPM is provided. Engine is “KIRLOSKAR” model HA 294. Engine powers bitumen pump and air compressor. Fuel consumption of the engine is 3-4 liters per hour.
BITUMEN PUMP AND AIR COMPRESSOR
The engine drives bitumen pump and air compressor.

Bitumen pump is connected to the engine by a heavy duty clutch. Just engaging the clutch will activate the pump. Bitumen pump capacity is upto 500 liters per minute. Bitumen pump pressure can be increased upto 8-10 Bar.

Air compressor is double cylinder of capacity 3 HP and is driven by a V-belt through engine. Compressor gives an output of 3 HP with discharge pressure 150 PSIG and 11.25 CFM.
RETURN LINE
Return line in Atlas bitumen sprayers is designed in such a way that you can set and adjust the spray bar pressure from the gland cock. The gland cock can also be adjusted to fasten the bitumen heating process during starting up the machine.
BITUMEN TRANSFER LINE
Bitumen can be also be filled in the tank by the bitumen transfer line. Filling of bitumen is easy and by the same pump which is provided with the sprayer. No extra pump is required.
SPRAY BAR
Standard spray bar provided with the Atlas tar sprayer is folding type fitted with pressure gauge regulating valve etc.
Standard width of the spray bar is from 2.4 mtrs to 4.2 mtrs which can be extended to upto 6.0 meters.
Adjustment of spray bar height is mechanical.
Pre-heating of spray is by full circulation of preheated bitumen.
Spraying pressure can be adjusted from 0-6 bar.
One Hand spray pipe SS Corrugated ¾” x 5 meter is also provided.
Cleaning of the spray bar is by air pressure and by diesel oil.
Rate of spray application: 0.3-1.0 kg per sq meters, Calibration chart is provided at the operator’s platform.
PNEUMATIC SYSTEM
A pneumatic hand lever valve is provided near the operator's seat provided with the bitumen pressure distributor. Pneumatic system is important to open and close the spray nozzles.
CLEANING SYSTEM
A very effective cleaning system for all the pipes is provided with the asphalt sprayer near the bitumen pump. At the end of day bitumen flow has to be cut off and entire spray line and spray bar can be cleaned by using air pressure and diesel.